Turbo Hydramatic 350 C transmission in Victoria, British Columbia for sale

This is the Lock Up Torque Convertor version with the C designation which were used on many GM trucks, vans, and cars from 1980 thru 1986.
If in doubt you can tell if you have the Lock Up version by checking to see if you have an electrical wire connection plug on the driver side just behind the gear shift lever - as seen in photos.
350 trannies were made with short, long and special 4X4 output shaft/cast aluminum housing - this one is the long shaft version which was used in GM pickups, Suburbans, and Jimmys from 1980 thru 1986 - but NOT vans.
If you needed to use this in your car or van - which normally came with the short output shaft - you would need to get your drive shaft shortened at a machine shop.
If you did not want to get your drive shaft shortened then it would be fairly easy to take apart both your tranny and my tranny and then swap your shorter output shaft into my tranny - and this would also be what you would need to do to use this in any 4X4.
Note that there is no torque convertor with this tranny so you will have to use the one you now have or get one from a wrecker, etc. And it absolutely has to be a Lock Up version of torque convertor as the non lock up one will NOT FIT!!!!
Quoted price is IF the buyer brings any kind, any condition, automatic transmission for which I can get the scrap value.
Without a scrap core then the price would be $50.